How Much Does a New HVAC System Cost in Texas?

How Much Does a New HVAC System Cost in Texas?

What a new HVAC system costs in Texas, what pushes the price up or down, and how to compare quotes for AC, heat pumps and furnaces without overpaying.

Ask three HVAC companies what a new system costs and you may get three numbers that are thousands of dollars apart. That isn't always a sign that somebody is overcharging. The price depends on the size of your house, the type of equipment, how efficient it is and the shape your ductwork is in. It also depends on what each company quietly left out of the quote.

Below is a realistic look at replacement costs for Texas homes, what moves the number and how to compare bids fairly. Prices change often, so treat the ranges as ballpark figures, not a price list.

Typical price ranges

For an average Texas house, replacing the outdoor AC unit along with a matching indoor coil often lands somewhere between about $6,000 and $12,000. Replacing the whole split system, meaning the outdoor unit plus a new furnace or air handler, commonly runs from around $8,000 to $15,000. High-efficiency variable-speed equipment, a large two-story house with two systems, or a job that includes all new ductwork can push the total past $20,000.

Equipment prices rose in 2025 as manufacturers switched to newer, lower impact refrigerants such as R-454B and R-32 under EPA rules. If you priced a system a few years ago, expect today's quotes to come in higher.

What drives the price

Size

Bigger systems cost more, but bigger isn't automatically better. An oversized AC cools the house in short bursts, shuts off before it pulls out much humidity, and wears out faster. The size should come from a Manual J load calculation that looks at your insulation, windows, air leaks and which way the house faces. If a contractor sizes your system by glancing at the old unit's label, ask why.

Efficiency

Efficiency is rated in SEER2. Federal minimums for southern states went up in 2023, so even a basic new system is more efficient than a 15-year-old one. Paying extra for a higher rating makes more sense in Texas than in most of the country, since the AC runs so many hours a year. Two-stage and variable-speed systems also run longer at lower output, which helps with humidity and evens out temperatures between rooms.

Equipment type

A central AC with a gas furnace, a heat pump with electric backup heat, and a dual fuel setup all price differently. Packaged units that hold everything in one outdoor cabinet have their own pricing. Your current setup usually points the way, though switching types is possible.

Ductwork

Ducts are where quotes split apart the most. Some bids assume your existing ducts are fine. Others include sealing or partial replacement, or a full new duct system. Old flex duct in a Texas attic is often crushed, torn or disconnected, and a new high-efficiency unit hooked to leaky ducts will never deliver what the label promises.

Installation conditions

Attic installs take more labor than closet installs, especially in tight attics with low clearance. Current codes often call for a service platform, a secondary drain pan, a float switch and a light near the equipment. Electrical upgrades, a new outdoor disconnect, a condensate pump or a crane for a rooftop unit all add to the bill. Many cities require a permit as well.

Costs that are easy to miss

When you compare quotes, look for these line items. If one bid includes them and another doesn't, the cheaper bid may not be cheaper at all.

  • Removing and hauling away the old equipment
  • A new refrigerant line set, which some newer systems need
  • A new thermostat
  • A new pad for the outdoor unit
  • Permit and inspection fees
  • Duct sealing or repairs
  • An extra return air path for rooms that run hot

Ways to bring the total down

Start with the house. If your attic insulation is thin or your ducts leak, fixing that first can cut the cooling load enough to justify a smaller, less expensive system. Our attic insulation guide explains what to look for.

Timing helps too. Contractors have more open schedules in early spring and fall than in July, and you have time to compare bids instead of taking whoever can come tomorrow.

As for incentives, the federal 25C tax credit for efficient AC units, heat pumps and furnaces ended for equipment installed after December 31, 2025. Some Texas electric utilities and cities still run their own rebate programs, so check with your electric provider before you sign.

How to compare quotes side by side

A solid quote spells out the brand and model number of both the indoor and outdoor units, so you can confirm they're a matched system. It lists the SEER2 rating, the tonnage and whether a load calculation was done. It says what happens to the ductwork, the line set and the thermostat, and whether the permit is included. It also states how long parts and labor are covered and who handles a problem in year three.

If a quote is vague on any of those, ask for it in writing. If you're still sorting out what a furnace, air handler and condenser actually do, our explainer on what an HVAC system is will help you read the fine print.

Get a clear picture before you buy

For current pricing details, see our new AC unit cost page. And if you'd like someone to look at the whole house before you choose equipment, ask Texas Energy Pros for a free home energy audit. It covers insulation, air leaks and ductwork along with your current system. Reach out and we'll set up a time.