Metal roofing built for Texas weather

Metal Roofing in Bartlett, TX

Lots of Bartlett properties have a metal barn or shop behind the house. Matching the house to it is easy; picking the right panel for the house takes a little more thought.

Metal Roofing Bartlett
Metal Roofers Bartlett

Plenty of metal roof talk in Bartlett starts out in the yard. There's a shop or a hay barn wearing ribbed panels that have been up there as long as anyone can remember, and the owner wants the house to match. That's doable. It just doesn't mean putting the same product on both.

Same color, different panel

Barns and shops around Bartlett mostly wear exposed-fastener panels, the ribbed sheets screwed straight through into wood or steel purlins. They're quick to hang and cheap per square, and on a building nobody sleeps in, a small drip is an annoyance rather than a ceiling repair.

On the house, we'd usually go with standing seam. The panels lock together at raised ribs, and the clips holding them down sit under the metal where the sun can't reach them. That means far fewer holes through the roof. The clips also let each panel grow and shrink between a hot afternoon and a cool night without working anything loose.

To make the place look like it belongs together, match the color. A light gray painted house roof beside a bare Galvalume barn looks planned. So does a barn red shop next to a house in the same red, if that's your taste.

Keeping a screw-down roof dry

Exposed-fastener panels make fine roofs. They just need checking, because every screw seals with a rubber washer and years of sun dry that washer out until it splits.

  • Look the roof over once a year, from a ladder or with binoculars, for screws that have backed out.
  • Swap tired screws for new ones, going up a size where the old hole has wallowed out.
  • Check the ridge cap and gable trim after any strong wind.
  • Keep a couple of spare panels from the original order, since paint batches can shift a shade.

Older homes around the downtown blocks

Bartlett's houses span a lot of decades, and some went up long before central air. Before metal goes on one of those, we look at what's under the old roof. Older homes often have board decking with gaps between the planks. Some panel systems can go over boards like that and some can't, so it may take a layer of new sheathing first. Soft or rotted boards get replaced either way.

Then there's the attic. A metal roof bounces back a good share of the sun, but the attic still needs intake at the soffits and exhaust near the ridge, and the ductwork up there still needs its own insulation. If your ducts run through that space, a radiant barrier and a thicker blanket on the attic floor still earn their keep under metal. If the back bedrooms stay warm after all that, have the AC checked.

What a fair quote spells out

Two metal roof prices can look far apart because they describe different jobs. Ask that each one lists:

  1. The panel type and the steel gauge (a lower number means thicker steel).
  2. Whether the old shingles come off or the metal goes over them.
  3. The underlayment, and whether it's rated for the heat that builds under metal.
  4. Trim, flashing and ridge vent, piece by piece.
  5. Who hauls off the old material.

For the rest of the house, our Bartlett home energy guide covers attics, doors and siding.

Bartlett Metal Roofers

Get a Free Bartlett Metal Roofing Audit

Let our metal roofing pro in Bartlett give you an audit for installing a metal roof. We'll share details on costs to install, along with valuable insight on energy savings with each type of roof. Metal roofs can save you quite a bit of money in the long run, let us show you.

How we help with metal roofing

It starts with a free home energy audit. We look at the roof, the attic, the insulation and the ductwork, then explain where a metal roof would help and where another fix would do more for your bills.

You get the numbers in plain language, so you can compare quotes and decide on your own schedule.

Questions to ask a metal roofer

Metal roofing needs different tools and flashing details than shingles, so ask how many metal roofs the crew has installed and ask to see a few of them.

Ask what the panel manufacturer's warranty covers, what the installer covers on workmanship and for how long, and get both in writing before work starts.

Not sure metal is right for your house? Book a free home energy audit and we will look at the roof, the attic and the insulation together.

sEE HOW MUCH YOU CAN SAVE

Schedule an appointment today

If you feel like you're spending too much on heating and air conditioning, a home energy audit by Texas Energy Pros shows you where the money is going.

Schedule an Appointment