Metal roofing built for Texas weather

Metal Roofing in Florence, TX

Around Florence, plenty of houses share the property with a hay barn or a shop. Here's how to pick metal gauge and finish for the house roof, and why it needn't match the barn's.

Metal Roofing Florence
Metal Roofers Florence

Gauge: thicker steel goes on the house

Florence is hay and ranching country in northwestern Williamson County, and properties outside town often have a barn, a shop or an equipment shed with metal on it already. So when the house needs a roof, owners naturally ask whether to use the same panels. Usually the answer is no, starting with the thickness of the steel.

Gauge numbers run backward: the lower the number, the thicker the steel.

  • 29 gauge is the thin, economical sheet common on barns and sheds. It's fine where a dent or two doesn't bother anybody.
  • 26 gauge is a common middle choice for exposed-fastener panels on homes and sturdier shops. Stiffer, and it dents less.
  • 24 gauge is typical for residential standing seam. It stays flatter, shrugs off hail better and spans between clips without waving.
  • 22 gauge shows up mostly on commercial buildings and a few high-end homes.

On a house, we'd go no thinner than 26, and 24 for standing seam. The barn can keep its 29 gauge if it's sound and dry inside.

Bare Galvalume or painted

Bare Galvalume has a silver, lightly spangled look that weathers to a soft matte gray, and with no paint on it there's nothing to fade. It also comes with a heat quirk. New bare metal reflects a lot of sunlight, but it's poor at giving off the heat it does absorb, so on a July afternoon it can run hotter than a light painted panel. Painted steel in a pale or cool-pigment color usually keeps the attic cooler. If you go painted, the tougher paint lines hold their color longer through years of summers.

Should the house match the barn

It doesn't have to. A painted standing seam house beside a bare Galvalume barn looks fine as long as the colors sit in the same family. A charcoal or dark bronze house next to weathered gray outbuildings works. A bright red house roof next to a silver barn tends to fight. If you're redoing both, order the trim colors at the same time so nothing comes up mismatched.

Getting long panels out to the country

Panels for a ranch house can be long, and suppliers usually cut them to length for each slope. Make sure the delivery truck can reach the site after a rain, that there's a dry, level spot to keep bundles off the ground, and that the stack doesn't sit wet. Water trapped between stored panels causes white rust and stains that won't come off. If rain is coming, tilt the bundles so they drain and loosen the cover so air can move underneath.

Power

In town, Florence is in Oncor's delivery area with retail choice, while some rural properties around it are on Pedernales Electric Cooperative. A reflective house roof cuts attic heat on either system. If the house still won't cool down, have the AC checked. Our Florence page covers windows and insulation for ranch homes.

Florence Metal Roofers

Get a Free Florence Metal Roofing Audit

Let our metal roofing pro in Florence give you an audit for installing a metal roof. We'll share details on costs to install, along with valuable insight on energy savings with each type of roof. Metal roofs can save you quite a bit of money in the long run, let us show you.

How we help with metal roofing

It starts with a free home energy audit. We look at the roof, the attic, the insulation and the ductwork, then explain where a metal roof would help and where another fix would do more for your bills.

You get the numbers in plain language, so you can compare quotes and decide on your own schedule.

Questions to ask a metal roofer

Metal roofing needs different tools and flashing details than shingles, so ask how many metal roofs the crew has installed and ask to see a few of them.

Ask what the panel manufacturer's warranty covers, what the installer covers on workmanship and for how long, and get both in writing before work starts.

Not sure metal is right for your house? Book a free home energy audit and we will look at the roof, the attic and the insulation together.

sEE HOW MUCH YOU CAN SAVE

Schedule an appointment today

If you feel like you're spending too much on heating and air conditioning, a home energy audit by Texas Energy Pros shows you where the money is going.

Schedule an Appointment