Metal roofing built for Texas weather

Metal Roofing in Wells Branch, TX

Wells Branch homes from the 1980s mix brick, stone and siding. A metal roof here has to suit those walls and handle long Travis County summers, so color takes some thought.

Metal Roofing Wells Branch
Metal Roofers Wells Branch

A roof color that gets along with brick and stone

Wells Branch was built in phases starting in the 1980s, on the ground between Bratton Lane and I-35, and a lot of those houses wear red or tan brick, some limestone and a bit of siding up in the gables. A new metal roof covers a big share of what people see from the street. Pick the wrong color and it argues with the walls for decades.

Pairings that tend to look right on these houses:

  • Red or orange brick: charcoal, dark bronze or a weathered copper tone. A bright red roof usually clashes.
  • Tan brick or cream limestone: a medium gray, a light stone shade or a muted green.
  • Brick with painted siding on the gables: pull the roof color from the darkest trim, not from the siding.
  • Bare Galvalume: it reads cool and industrial, which suits a modern remodel more than a traditional 1980s front elevation.

Hold a real panel sample against the wall in morning and late afternoon light. Little paint chips under store lighting will fool you.

Light shades, dark shades and cool pigments

In Travis County, color is also an energy choice. Lighter panels reflect more sunlight, stay cooler and pass less heat down into the attic. Dark roofs used to mean a hot roof, period, but many metal paint lines now use pigments that bounce back a good share of the infrared part of sunlight even in deeper shades. Ask for the solar reflectance and thermal emittance numbers the Cool Roof Rating Council lists for the exact colors you're weighing, and compare them side by side.

How much it matters depends on your attic. If the ducts and air handler live up there, as they do in most houses in this area, a cooler roof deck takes some load off the AC. If the attic is already deeply insulated and the ducts are sealed, the gap between colors shrinks.

Some paint holds up longer than others

Hard sun is what wears out a painted roof. Most residential metal comes in one of two paint families. Silicone-modified polyester, usually called SMP, costs less and does fine on plenty of homes. PVDF coatings, often sold under the Kynar 500 name, hold their color and resist chalking longer, and the difference shows most on dark and saturated colors. On a roof you'll see from the driveway every day, we think the tougher paint is usually worth it.

A few things to settle before ordering

The Wells Branch MUD looks after parks, trails and pools, not your roof, but some sections carry deed restrictions or an HOA with its own say on colors and panel profiles. Get the answer in writing before panels are ordered. Trim, flashing and ridge caps come in matching colors, so the whole package gets picked at the same time.

If upstairs rooms still feel stuffy once the roof is done, the AC may be the weak link. For windows, insulation and the other upgrades these 1980s houses tend to need, see our Wells Branch page, or read more of our roofing guides.

Wells Branch Metal Roofers

Get a Free Wells Branch Metal Roofing Audit

Let our metal roofing pro in Wells Branch give you an audit for installing a metal roof. We'll share details on costs to install, along with valuable insight on energy savings with each type of roof. Metal roofs can save you quite a bit of money in the long run, let us show you.

How we help with metal roofing

It starts with a free home energy audit. We look at the roof, the attic, the insulation and the ductwork, then explain where a metal roof would help and where another fix would do more for your bills.

You get the numbers in plain language, so you can compare quotes and decide on your own schedule.

Questions to ask a metal roofer

Metal roofing needs different tools and flashing details than shingles, so ask how many metal roofs the crew has installed and ask to see a few of them.

Ask what the panel manufacturer's warranty covers, what the installer covers on workmanship and for how long, and get both in writing before work starts.

Not sure metal is right for your house? Book a free home energy audit and we will look at the roof, the attic and the insulation together.

sEE HOW MUCH YOU CAN SAVE

Schedule an appointment today

If you feel like you're spending too much on heating and air conditioning, a home energy audit by Texas Energy Pros shows you where the money is going.

Schedule an Appointment